SYS.LW.FRX — PRODUCT DEEP DIVE

Vallum FRX System

The only artificial living wall system engineered from substrate to foliage tip for fire safety, structural integrity, and decade-long visual performance. Built for architects, specifiers, and code-conscious projects.

NFPA 701 Method 2 Class A Rated UV Stabilized Indoor / Outdoor

SEC.01 — ENGINEERING

Engineered for Real Buildings

The Vallum FRX is not decorative trim bolted to drywall. It is a structural panel system designed to meet the mechanical and fire safety demands of commercial construction, from high-rise lobbies to exterior cladding at altitude.

Every component is purpose-built: the aluminum substrate handles wind loads and seismic forces. The interlocking rail system allows rapid field mounting without specialized tools. The foliage matrix is factory secured to eliminate jobsite adhesive failures.

We test at the assembly level, not the component level. This means the entire panel -- substrate, foliage, and mounting hardware -- passes NFPA 701 Method 2 as a unified system, not as isolated parts claiming compliance by association.

Vallum FRX system detail showing aluminum substrate and foliage matrix

SEC.02 — SPECIFICATIONS

Full Technical Specifications

Every measurable property of the Vallum FRX, documented for specification writing and code review.

01 Substrate Structural

Material: 6061-T6 Aluminum
Thickness: 1.2mm sheet, 3mm rail
Finish: Powder-coated matte black
Corrosion: ASTM B117 salt spray tested
Fire Rating: Non-combustible (A1)

02 Foliage UV-Stable

Material: PE / LDPE polymer blend
UV Rating: 3000+ hrs accelerated aging
Fire Test: NFPA 701 Method 2 pass
Density: 288 tips per sq ft
Color Retention: 5-7 yrs exterior, 10+ interior

03 Panel Dimensions Modular

Standard: 40" x 40" (1016 x 1016mm)
Weight: 4.8 lbs/sq ft installed
Depth: 3.5" from wall face
Custom: Up to 96" x 48" single panel
Tolerance: +/- 1/8" on all dims

04 Mounting System Z-Clip

Type: Interlocking Z-clip rail
Load Capacity: 25 lbs/linear ft
Substrate: Steel stud, CMU, concrete
Seismic: Zone 4 rated attachment
Access: Tool-free panel removal

SEC.03 — MATERIALS

Materials Breakdown

Component-level detail for procurement teams, general contractors, and code officials.

Component	Material	Standard	Notes
Backing Panel	6061-T6 Aluminum	ASTM B209	Powder-coated, non-combustible
Mounting Rail	16-gauge galvanized steel	ASTM A653	Z-clip interlocking, seismic rated
Foliage Matrix	PE / LDPE polymer blend	NFPA 701 Method 2	factory secured, UV-stabilized
Fasteners	304 Stainless steel	ASTM F593	Corrosion-resistant, seismic compliant
Edge Trim	Extruded aluminum	ASTM B221	Color-matched, snap-fit
Sealant	Silicone-based, neutral cure	ASTM C920	UV-resistant, non-staining

SEC.04 — PERFORMANCE

Why Architects Specify Vallum

Six engineering decisions that separate Vallum FRX from commodity panel products.

Assembly-Level Fire Testing

The complete panel assembly -- substrate, adhesive, and foliage -- is tested as one unit under NFPA 701 Method 2. No component-level extrapolation or "inherently fire-resistant" claims.

Structural Aluminum Substrate

6061-T6 aluminum handles wind loads up to 30 PSF and seismic Zone 4 forces. This is not foam or plastic backing -- it is structural material that engineers can calculate against.

factory secured Foliage

Foliage is secured under controlled factory conditions before shipping. This reduces adhesive failures, supports uniform density, and enables QC inspection before the product reaches the project site.

Tool-Free Panel Access

Z-clip rails allow any individual panel to be removed and replaced without disturbing adjacent panels. Critical for maintenance access, damage repair, and future reconfiguration.

3000+ Hour UV Aging

Accelerated weathering tests prove color stability far beyond typical 500-hour certifications. Real-world performance: 5-7 years exterior in direct sun, 10+ years in controlled indoor environments.

Custom Pattern Engineering

Each project gets a unique foliage pattern plan. Species mix, color gradient, and density are mapped per panel to create organic visual movement across the full installation area.

SEC.05 — INSTALLATION

Installation Process

Vallum FRX installs in a fraction of the time required by live plant systems. No irrigation plumbing, no waterproofing membrane, no growing medium. The Z-clip rail system mounts directly to steel stud, CMU, or concrete substrates.

Average install rate: 200 sq ft per day with a two-person crew. A 1,000 sq ft lobby wall completes in under a week, including rail layout, panel mounting, and edge trim.

Nationwide service: Our certified installation teams operate across all 50 states. We handle freight logistics, site measurement, and final commissioning.